FDM Filament
Material Coverage: High-speed / general / aesthetic / engineering / flexible / support
PLA+
FDA-certified, tougher than standard PLA, drillable, smooth surface; near-universal FDM compatibility.
View Details →
High-Speed PLA
Engineered for high-speed FFF; up to 300mm/s, 4–5× faster than standard PLA.
View Details →
PETG
Waterproof, chemical-resistant, tough & translucent; no enclosure needed, easy as PLA.
View Details →
ABS
Heat-resistant, acetone-polishable; automotive, appliances, functional prototypes.
View Details →
Flame-Retardant ABS
UL94-V0 flame-retardant, durable, heat-resistant; electronics enclosures.
View Details →
Carbon-Fiber PLA
Chopped-carbon-fiber reinforced; high strength/modulus, matte finish, high-speed.
View Details →
Super-Tough PLA
Toughness far above PLA+/ABS/PETG; ideal for mechanical use, easy to print.
View Details →
Carbon-Fiber Nylon
CF-reinforced nylon, metal-replacing; self-lubricating, HDT up to 155°C.
View Details →
High-Temp CF Nylon (PA6)
PA6 + 15% CF; continuous 150°C / short-term 180°C, metal-replacing.
View Details →
Glass-Fiber Nylon
GF-reinforced nylon; rigid, impact & chemical resistant; jigs/fixtures.
View Details →
Industrial PEEK
Self-extinguishing, chemical-resistant, strong; HDT 205°C; aerospace/oil&gas.
View Details →
Lightweight Foaming PLA
Active-foaming; density to 0.54 g/cm³, 220% expansion; ideal for RC/UAV models.
View Details →
Silk / Aesthetic PLA
Silk-gloss, multi-color gradient, rainbow, matte, marble, glitter, glow series.
View Details →
Soluble / Support
PVA / fast-PVA / HIPS (limonene-soluble) / cleaning filament for dual-head support.
View Details →FGF Pellet
Material Coverage: Sculpture & large-part construction — ABS/ASA/PET/PLA modified — 2.0–5.0mm
NZ-K151 ABS Pellet
General ABS pellet, glossy, chemically polishable; sculptures & large display pieces.
View Details →
NZ-K310FR ASA+PC FR
ASA+PC flame-retardant pellet, weatherable; outdoor large parts with FR needs.
View Details →
NZ-K106 Pellet
Balanced strength/toughness/wear high-polymer construction pellet, acid/alkali resistant.
View Details →
NZ-K312 ASA+20%GF
GF-reinforced ASA (20%) — heat/chemical/tear resistant, anti-warp for large AM, UV-stable.
View Details →
NZ-K411 PET Pellet
PET-based large-part pellet, tough with good surface; outdoor installations.
View Details →
NZ-K700 PLA Pellet
Eco biodegradable PLA pellet, easy to print; large cultural sculptures & displays.
View Details →
SLA / UV Resin
Material Coverage: Standard / tough / ABS-like / nylon-like / PMMA-like / high-temp / washable / flexible
NZ-UV High-Temp Resin (HT170)
170°C HDT, 345°C decomposition; hot-runner tooling, under-hood prototypes, lamp reflectors.
View Details →
NZ-UV Engineering Resin (355nm)
2638–2726 MPa tensile modulus, 78–87 Shore D; high-load structures.
View Details →
NZ-UV Clear Resin (355nm)
Clear transmission, stable curing; transparent flow-analysis models, optical lens prototypes.
View Details →
NZ-UV High-Toughness Resin (355nm)
42–55 J/m notched impact; durable prototypes, functional snap-fits.
View Details →
NZ-UV Standard
High-precision, fine surface, macaron colors; fits all resin printers.
View Details →
NZ-UV Bio PLA Pro
Plant-based PLA resin — balanced strength/toughness, low-odor, eco-friendly.
View Details →
NZ-UV Hard-Tough
High-impact engineering resin, durable & drillable; industrial/automotive parts.
View Details →
NZ-UV ABS-Like
ABS-like properties — high strength/impact, crack-free tapping; protective housings.
View Details →
NZ-UV Industrial Series
Self-developed industrial SLA resins: white/yellow/tough/dental-gray/clear/green.
View Details →SLS Nylon Powder
Material Coverage: PA12 / GF-PA12 / PA11 / TPU / CF-nylon
NZ-PA12 General-Purpose Nylon
Most widely used SLS engineering powder; balanced strength/stiffness.
View Details →
NZ-TPU Elastomer Powder
Rubber-like feel, high rebound; flexible fixtures, damping pads, shoe midsoles.
View Details →
NZ-PA11 Bio-based Nylon
Castor-oil derived; flexible, impact-resistant, low moisture pickup.
View Details →SLM Metal Powder
Material Coverage: 316L · AlSi10Mg · 18Ni300 · TC4 · Inconel718 · CoCr · CuSn10 · GH3625
316L Stainless Steel
Austenitic SS — corrosion-resistant, tough; molds/medical/industrial.
View Details →
18Ni300 Maraging Steel
Maraging tool steel — high strength/hardness after aging; conformal-cooling molds.
View Details →
Ti6Al4V (TC4)
Core Ti alloy — high specific strength, corrosion-resistant, biocompatible.
View Details →
DLP Dental Resin
Material Coverage: Models / ortho / surgical guides / temp crowns / gingiva / casting / jewelry wax
